Kategorier

  • Klarna

    Klarna

HPI RF-45 RECEIVER (2.4GHZ/3CH)

H 105422

HPI RF-45 RECEIVER (2.4GHZ/3CH)

568,00 kr
Inkl. moms Beräknas skickas inom 1-2 vardagar
Kvantitet
Lagervara

 

Snabba leveranser

 

Teknisk support

 

Säker betalning

Beskrivning

The RF-45 receiver is the perfect size to fit in any RC car or truck. Its tiny size is just 33x26mm and only 13mm high, and its extremely light weight of just 8 grams means it won't affect the weight balance, no matter where it's installed. Its short antenna means you can hide it underneath just about any RC body for a realistic 'stealth' look!

The RF-45 receiver has been designed with nitro and gas vehicles in mind. It has a convenient battery type switch that sets the low voltage failsafe cut-off limit. If you're using the radio system in a nitro or gas vehicle equipped with a LiPo receiver battery, just put the switch in the LiPo position. Some nitro vehicle owners use 6v NiMH 5-cell packs (commonly known as 'hump' packs), in this case put the switch in the NiMH position.

Using Frequency-Hopping Spread Spectrum (FHSS) digital 2.4GHz radio technology, the RF-45 works with any TF-40 or TF-45 radio via a simple and quick binding procedure to give you a secure, reliable connection at all times. Should the radio link ever fail for some reason, the radio will instantly switch the throttle channel to its failsafe position, which you can set to full brake for a nitro vehicle. HPI RTR vehicles already have the failsafe position set from the factory.

If you want to use the TF-45 transmitter with an electric vehicle, then simply pair the TF-45 with an RF-40 receiver instead of the RF-45.

RF-45 Receiver Features:

  1. Small size fits nearly anywhere
  2. Frequency-Hopping Spread Spectrum (FHSS) digital 2.4GHz radio technology
  3. Simple binding to the TF-45 transmitter
  4. Adjustable failsafe settings
  5. Battery type switch (7.4v LiPo or 6v NiMH)
  6. Short antenna wire
  7. 3rd channel plug can be used to control lights, winch, etc., or power a personal transponder
  8. Just 33x26x13mm in size
  9. Extremely light weight (8g)
  10. Note: the RF-45 should not be used with alkaline or other non-rechargeable batteries
Produktdetaljer
H 105422
2 Produkter
11 andra produkter i samma kategori:
Mottagare R2104GF 4K T3PR,...

Referens: R2104GF

Futaba

Mottagare R2104GF 4K T3PR, 2PL, 3PL, 4PL S-FHSS

Mottagare R2104GF 4K T3PR, 2PL, 3PL, 4PL S-FHSS. The R2104GF is designed for use with the Futaba S-FHSS or FHSS system transmitter.R2104GF Specifications: 4-channels Receiving on 2.4GHz band System: S-FHSS/FHSS system (auto detection) Operation mode: Normal/High speed (auto detection) Power requirement: 4.8V or 6V (shared with servo) Current drain: 30mA...

Pris 720,00 kr
Mer
Lagervara
HPI RF-50 RECEIVER

Referens: 160304

Hpi Racing

HPI RF-50 RECEIVER

The RF-50 is the latest receiver from HPI-Racing and a great match for the HPI 2.4Ghz TF-41 and TF-50 series transmitters. Simply bind and drive and have fun with your friend's thanks to crystal-free 2.4GHz technologyIts tiny size is just 35x26mm and only 16mm high, and its extremely light weight of just 11.5 grams means it won't affect the weight...

Pris 266,00 kr
Mer
Sista produkten i lager